Description Of Controls; Switching The Appliance On And Off - Angelo Po B151HU Manuel D'utilisation

DESCRIPTION OF CONTROLS

The illustration shows the appliance's control panels, while the list details
the descriptions and functions of the individual controls.
A – Digital display: displays the working parameters and alarm codes.
B – Function enabling button. enables the function shown on the dis-
play.
C – Back button: cancels the current operation and returns to the previ-
ous page.
D – Reset button: resets the alarms (beepers and lights).
E – "START-STOP" button: Starts or ends the selected program cycle,
shown on the display.
F – Knob: Used to select the function required or modify values.
To select one of the zones required (function or value) turn the knob clock-
wise or anticlockwise.
- Clockwise: scrolls "downwards" through zones or increases the value
shown.
- Anticlockwise: scrolls "upwards" through zones or decreases the val-
ue shown.
After selecting the function required or the value, press the knob to con-
firm and save the function or value.
G – On/off button: turns the appliance's electricity supply on and off.
H – USB port: used to connect a remote data storage unit to the appliance.
L – "Blast chiller" emergency key: it is used in the event of an oven
board anomaly to activate a Soft +37°F blast chilling cycle.
M – The RGB LED bar, built into the door handle or on the dashboard,
takes on a different colour depending on the process in progress:
- Stand-by: low intensity steady light blue light
- Chilling/freezing cycle (including infinity, Multy) Defrost and Cooling,
in progress: high intensity flashing light blue light
- Conservation in progress: high intensity steady light blue light
- Freezing in progress: high intensity steady red light
- Sanitation in progress: low intensity steady red light
- Fault: steady yellow light

SWITCHING THE APPLIANCE ON AND OFF

Proceed as follows.
Lighting
1 – Operate the appliance's master switch to connect it to the electrical
mains.
2 – Turn on the water supply tap.
3 – Press button (G) to switch on the appliance.
4 – The display (A) comes on, and after a few seconds it shows the page
giving access to the appliance's main functions.
Turning off
Important
Always switch off the appliance after use.
5 – Press button (G) to switch off the appliance.
6 – Turn off the water supply tap.
7 – Cut off the mains electricity supply using the appliance's master
switch.
English - 11 -
A
B
C
D E
F
H
G
IDM-39617700300.tif
A
G
Use and installation manual
IT
US
DE
CAN
ES