15 – Select the quantity of load to be treated, mini-
mum, medium, maximum.
16 – Press the knob to confirm the selected choice.
17 – Select the desired type of cycle control.
18 – Press the knob to confirm the selected choice.
19 – Select the desired type of cycle control, with
probe or by time.
20 – Press the knob to confirm the selected choice.
- make it a favourite program
To set this as a favourite program, press the"set
as favourite" button and proceed as described on
page 13 (alphanumeric mode).
21 – Press the button to start the selected cycle.
English
>>>
>>>
>>>
>>
- 23 -
set as
favourite
Use and installation manual
IT
US
DE
CAN
ES