Recommendations For Handling And Installation; Transport; Handling And Installation - Angelo Po B151HU Manuel D'utilisation

Alarm/Event
A18 - Mother board com-
munication alarm
A19 - Mother board EEP-
ROM alarm
A20 - Panel board EEP-
ROM alarm
A21 - Needle probe 1
alarm
A22 - Needle probe 2
alarm

RECOMMENDATIONS FOR HANDLING AND INSTALLATION

Important
When handling and installing the appliance comply with the informationprovid-
ed by the constructor directly on the packaging, on the appliance and inthe in-
structions for use.
If necessary, the person authorised to carry out these operations must organi-
sea "safety plan" to protect the people directly involved.

TRANSPORT

Different means of transport may be used,
dependingpartly on the destination.
The chart shows the most commonly used al-
terna-tives.
During transport, fix the packaging to the
means oftransport securely to prevent unde-
sirable shifting.
UNPACKING
After removing the packaging, ensure the integrity of the equip-
ment and verify that all the parts or components are present and
that the characteristics and state correspond to the specifications
of the your order.
If not, please inform the retailer immediately.
Remove pvc protective film from all over the appliance.
Important
All the packing material must be disposed of in accordance
with the prevailing regulations in the country where the
equipment is used and in any case must not be dispersed
into the environment.
English
Cause
Communication between the panel
board and the display board inter-
rupted
Data memory corrupted
Data memory corrupted
Needle Probe 1 interrupted
Needle Probe 2 interrupted

HANDLING AND INSTALLATION

- 51 -
Remedy
Qualified technician required
Qualified technician required
Qualified technician required
Qualified technician required
Qualified technician required
Lifting devices
means of transport
Use and installation manual
7
IT
US
DE
CAN
ES