Inserting/Removing Memory Module - MAXDATA 400M Guide D'utilisation

Memory

7.1 Inserting/Removing Memory Module

Page 7-2
Information in this document is subject to change without notice!!!
Model 400M & 700T User's Manual
The diagram on the left shows where the
two memory sockets are located; and how
the compartment door is opened.
The diagram on the left shows the
procedure on how individual memory
modules be inserted into its socket:
•
When inserting, the module should
have an angle of 45º with the
motherboard.
•
Gently press the module down as
shown by arrow 2.
•
You will hear a clicking sound when
the spring-locks (as shown by arrow
3) bent outward and then bend
inward to lock the memory module.