3.75G/Hspa Module - MAXDATA A Guide Utilisateur Concis

3.75G/HSPA Module

If you have included an optional 3.75G/HSPA module in your purchase option, follow the instructions below to install
the USIM card (which will be provided by your service provider), and then run the appropriate application supplied with
your module.
USIM Card Insertion
1. Turn off the computer, and turn it over and remove the battery
tery out).
2. Insert the USIM card as illustrated below until it clicks into position, and replace the battery.
1
1
Figure 5 - Battery Removal & USIM Card Insertion
(slide the latches in the direction indicated below and slide the bat-

USIM Card Orientation
Note that the USIM card's readable side (with
the gold-colored contacts) should face up-
wards as illustrated.
1
7