Chapter 10 The Cd-Rom Disc; Dos Utilities And Drivers - MAXDATA 400M Guide D'utilisation

Model 400M & 700T User's Manual

Chapter 10 The CD-ROM Disc

This notebook is designed to support the latest operating systems which include
Windows 98™, Windows NT 4.0™, Windows 2000™. The CD-ROM Disc inside your
notebook package contains utilities, drivers, and programs for DOS and different
Windows operating systems.

10.1 DOS Utilities and Drivers

The following DOS Utilities are located in the directory "DOS" of the CD-ROM Disc:
•
System BIOS Flash Utility
•
Keyboard Controller (KBC) Flash Utility
•
"Save-To-File" File Creation Utility
•
CD-ROM Driver
•
DVD-ROM Driver
•
Touchpad Driver
On detail on how to run these utilities, please refer to the respective "*.doc" files.
The "Save-To-File" file
In order for the system to be able to perform the "Save-To-File", the "Save-To-File"
File needs to be created first. For detail on how the Save-To-File (hibernation) can be
activated, refer to Chapter 6.6 and Chapter 11.6. When being activated, the Save-To-
File would actually save all the memory settings (system memory, video memory, and
system status) to this file. When this file is being created, it will take up contiguous
sectors in the HDD whose size would equal to the sum of the system memory, and video
memory plus some overhead. Therefore, if you have just upgraded your system memory,
you are requested to remove your old Save-To-File File, and then re-create a new one.
Information in this document is subject to change without notice!!!
The CD-ROM Disc
Page 10-1