Reducing Power Consumption; Removing/Inserting The Battery Pack - MAXDATA 400M Guide D'utilisation

Battery

6.7 Reducing Power Consumption

Although power conservation is a built-in function of your notebook, there are measures
é
you can take to reduce the power consumption:
é
Use the AC power whenever possible (for battery only).
Lower the intensity of the LCD backlight. A very bright screen translates to higher
é
power usage.
Try to use the HDD or the PCMCIA drive to read and write files, rather than using
the FDD.

6.8 Removing/Inserting The Battery Pack

Your battery can easily be removed and replaced. Make sure that the computer is
powered off before changing. If you would like to change the battery while power is on,
make sure the AC Adapter is inserted or that you have saved your work via the Save-To-
Disk feature.
Pin holes for
optional Port
Replicator
To insert battery, reverse the steps above.
Page 6-6
Information in this document is subject to change without notice!!!
Model 400M & 700T User's Manual
Follow these steps to remove the
battery pack:
•
Press the handle to the down-left
directions as shown by arrow 1.
At the same time, press another
handle to down-right direction as
shown by arrow 1.
•
Lift the battery pack up as shown
by arrow 2.