Boot Device Setup - MAXDATA 400M Guide D'utilisation

Model 400M & 700T User's Manual

11.7 Boot Device Setup

You will be greeted by this screen when you enter the Boot Device Setup Menu:
Quick Boot
Silent Boot
Boot Display Device
BootUp Num-Lock
st
1 Boot Device
nd
2 Boot Device
rd
3 Boot Device
Try Other Boot Devices
Quick Boot:
There are two options to this field, Enabled and Disabled. Enabled allows the system
to skip part of the Power On Self Test (POST) during system boot up.
Silent Boot:
There are three options to this field, Enabled, Disable, and Black. Enabled allows the
system to display the MAXDATA logo screen during system boot up. Otherwise, a
"black" screen would be displayed. This "black" screen would last for about 20 seconds,
and would appears as if the system has no response. The Disable screen lists the systems
BIOS information.
AMIBIOS SETUP - BOOT DEVICE SETUP
(C)2000 American Megatrends, Inc. All Rights Reserved
Enabled
Enabled
Simul. Mode
Off
CD/DVD
Floppy
st
1 IDE-HDD
Yes
Information in this document is subject to change without notice!!!
Configuring Your System
"Enabled" allows the system to skip
part of test during system is booting.
ESC: Exit ↑↓: Sel
PgUp/PgDn: Modify
F3/F4: Color
Page 11-13