Chapter 11 Configuring Your System; Configuration Software - MAXDATA 400M Guide D'utilisation

Model 400M & 700T User's Manual

Chapter 11 Configuring Your System

11.1 Configuration Software

The notebook can easily be configured to suit your personal needs. The built-in SETUP
program allows you to setup standard and advanced parameters as well as the Power
Management Features. The information is stored in a battery-backed CMOS memory;
so when the power is turned off, your setup is retained. This Configuration Software is
sometimes refer to as CMOS Setup, BIOS Setup, or simply the SETUP.
Note:
The SETUP can only be activated by pressing <F2> during system boot-up.
You are requested to perform the following one-time procedure immediately after you
have upgraded/reprogrammed your BIOS:
•
Press <F2> during system boot-up to get into the SETUP.
•
Choose Auto Configuration with Defaults.
•
Press Enter, and then select "Y" followed by Enter.
•
Choose Save Settings and Exit, then Enter.
•
Answer "Y" followed by Enter.
•
The system will boot-up automatically. Press <F2> during system boot-
up to get into the SETUP.
•
Now, you can customize the BIOS for your personal needs.
For detail on the BIOS SETUP, read on.
Note:
For information on the BIOS upgrade, contact your local notebook dealer.
Information in this document is subject to change without notice!!!
Configuring Your System
Page 11-1