Removing The Hard Disk Drive - MAXDATA 400M Guide D'utilisation

Model 400M & 700T User's Manual

4.3 Removing the Hard Disk Drive

Your Hard disk drive is easily removable and can be replaced or upgraded. There are
many advantages to having more than one hard disk. For example, separate hard disk for
each person that uses the computer, or separate hard disks for different purposes.
Follow these steps to remove the hard disk drive.
•
Make sure the system is powered off.
•
Remove the screw as shown by arrow 1.
•
Press the handle to the right as shown by arrow 2.
•
Press the handle up as shown by arrow 3.
•
Lift the HDD drive up as shown by arrow 4.
•
Note:
Reverse the above steps to install a hard disk drive. If you have just changed a
HDD, don't forget to change the settings in Pri Master of the Main Setup,
unless you have Pri Master set to Auto. For detail, see Chapter 11.3.
Information in this document is subject to change without notice!!!
FDD/HDD Drives
Page 4-3