Special Features - MAXDATA 400M Guide D'utilisation

Model 400M & 700T User's Manual

1.2 Special Features

Power Management
n
Power Saving can be switched to Customized or Disabled in the BIOS Setup.
n
System will enter Suspend-To-RAM mode (with the LCD panel
automatically turned off), when the cover is closed.
n
Advanced Power Management (APM), and ACPI supports.
n
Depending on user's setup, system enters Suspend Mode (Suspend-To-RAM
or Save-To-File) when no device activity occurs after an user selected time
duration.
n
In Suspend-To-RAM mode, all major devices and components (including
VGA chip and LCD panel) are shutdown to save energy.
n
In Save-To-File mode, system is completely shutdown for energy saving. Low
Battery Activity allow system to save memory contents and system activities
into a disk file called Save-To-File (refer to Chapter 10). When you power on
the system again, the system will return to exactly where you left off.
n
The Hard Disk Drive, HDD, would spin down for power saving if there is no
HDD access for an extended period of time.
Memory Expansion
System Memory, upgradeable from 32MB to 256MB. For more information, refer to
Chapter 7.
Hot Keys
Please see Appendix B for all available Hot Key functions; such as Contrast and
Brightness adjustment, and Suspend-To-RAM and Save-To-File etc.
Information in this document is subject to change without notice!!!
Introduction
Page 1-7