The Two Power Leds - MAXDATA 400M Guide D'utilisation

Before You Begin

2.3 The Two Power LEDs

Note:
For exact location of the Two Power LEDs, please refer to the View of the
Front Panel diagram in Chapter 2.2.
For more information on Battery Low-2 and pre-charge, please refer to
Chapter 6.
Page 2-6
The Battery Pack LED
•
LED on- The battery pack is being recharged
•
LED off- The battery pack is fully recharged
•
LED flashes (1/2 second on; ½ second off)- The battery pack is either in
Battery LOW-2 stage, or the battery pack is in pre-charge.
•
LED flashes (1 second on; 2 second off)- The battery pack is bad
The Power On LED
•
LED on- The system is powered on
•
LED off- The system is powered off
•
LED flashes- The system is in Suspend-To-RAM (S2R)
Information in this document is subject to change without notice!!!
Model 400M & 700T User's Manual