MAXDATA 400M Guide D'utilisation page 151

Configuring Your System
suspend mode, as determined by the setting in Suspend Option below. Suspend
Option has two option: Suspend (also referred to as STR) and, STF.
LCD Suspend:
There are two options to this field: Disabled, and Enabled. If this field is set to
Enabled, system would enter the type of suspend mode (as determined by the setting in
Suspend Option), when the LCD display is closed. Suspend Option has two option:
Suspend (also referred to as STR) and, STF.
Suspend Option:
There are two options to this field: Suspend, and STF. Suspend can also be referred to
as Suspend-To-RAM (STR). STF stands for Suspend-To-File, and can also be
referred to as hibernate/hibernation. STF provides as much as a power saving as if the
system had been powered off. While STR provides less power saving than STF, STR
saves more power than when the system is in Standby mode. The way to trigger a
resumption from STR and STF are the same; by pressing the Power Switch. However
resuming from STF takes a significantly more time than resuming from STR.
Auto Save To File:
There are two options to this field: Disabled, and Enabled. With this field set to
Enabled, system would automatically enter Save-To-File (STF) mode after the system
has been in Suspend-To-RAM (STR) mode continuously for 30 minutes.
Wake Up Alarm/ Resume Alarm Time:
Wake Up Alarm and Resume Alarm Time work hand-in-hand with one another. There
are two options to Wake Up Alarm: Disabled, and Enabled. You would be able to set
the Resume Alarm Time only if Wake Up Alarm has been set to Enabled. For
example with these two fields set to Enabled and 8:00AM respectively, the system
would be able to wake (resume) itself from Suspend (also referred to as STR) or STF to
normal operation at 8:00AM. The amount of time required to wake up from STF is
somewhat longer than STR.
Note: The time-out settings in the Power Management Setup is not applicable to
ACPI OS's: Win98 ACPI and Win 2000.
Page 11-12
Information in this document is subject to change without notice!!!
Model 400M & 700T User's Manual