System Security Setup; Change User Password - MAXDATA 400M Guide D'utilisation

Model 400M & 700T User's Manual

11.5 System Security Setup

You will be greeted by this screen when you enter the System Security Setup Menu:
Change Supervisor Password

Change User Password

Boot Password Required
Resume Password Required
Change Supervisor Password:
The Supervisor Password provides access:
•
to the SETUP Utility.
•
to the system during system boot up, if Boot Password (refer to below in Chapter
11.5) is enabled.
•
during resume from suspend (see Suspend Option in Chapter 11.6), if the Resume
Password (refer to below in Chapter 11.5) is enabled.
•
to unlock the keyboard, if keyboard is locked by pressing Ctrl-Alt-Backspace.
Change User Password:
The User Password provides access:
•
to the system during system boot up, if Boot Password (refer to below in Chapter
11.5) is enabled.
AMIBIOS SETUP - SYSTEM SECURITY SETUP
(C)2000 American Megatrends, Inc. All Rights Reserved
Press Enter
Press Enter
No
No
Information in this document is subject to change without notice!!!
Configuring Your System
If supervisor password is entered, the
system requires the supervisor
password to enter this Setup utility.
Pressing Ctrl-Alt-Backspace locks up
the keyboard until the password is
entered. The Cap Lock and Scroll
Lock LEDS will flash in sequence
while waiting for the user to enter a
password.
ESC: Exit ↑↓: Sel
PgUp/PgDn: Modify
F3/F4: Color
Page 11-7