MAXDATA 400M Guide D'utilisation page 361

Appendice G
This modem is suitable for use only on telephone lines proved with Loop Disconnect or
Multi-Frequency Dialing Facilities.
Users of this modem are advised that the approval is for connection to the PSTN via the
telephone line interface supplied with it. Connection of a modem to the PSTN by any
other means will invalidate the approval.
There is no guarantee of correct working in all circumstances. Any difficulties should be
referred to your supplier.
Some network operators require that intended users of their network request permission
to connect and for the installation of an appropriate socket.
The Ringer Equivalence Number (REN) of this modem is 1. REN is guide to the
maximum number of apparatus that can simultaneously be connected to one telephone
line. The REN value of each apparatus is added together, and should not exceed 4.
Unless otherwise marked, a telephone is assumed to have a REN of 1.
This modem is only approved for use of the following facilities:
•
Storage of telephone numbers for retrieval by a predator mined code.
•
Detection of initial proceed indication.
•
Automatic calling/ automatic answering.
•
Tone detection.
•
Loud-speaking facility.
This modem is not approved for connection to U.K./private speech-band services. This
modem does not support an automatic re-dial function. Any other usage will invalidate
the approval of your modem, if as a result, it then ceases to confirm to the standards
against which approval was granted. The approval of this modem is invalidated if the
apparatus us subject to modification in any material way not authorized by the BABT or
if it is used with, or connected to external software that have not been formally accepted
by BABT.
Page G-8
Modèle 400M & 700T – Manuel de l'utilisateur
Ce document peut être modifié sans avertissement préalable !!!