Inserting The Battery - MAXDATA PRO 660T Mode D'emploi

THE PREPARATION

INSERTING THE BATTERY

Figure 3
Figure 4
Figure 5
46
Your Notebook comes with a
partially charged battery.
Take the new battery from its
wrapping and insert it into the
notebook as shown in figure 3, 4
and 5.
Remove the palm rest by
applying gentle upward pressure
with your fingers close to the area
around the left Alt key, and the
right Ctrl key.Pull the palm rest
forward (Figure 3).
Insert the battery as shown in
Figure 4.
Slide the palm rest back in
to place, applying a slight
downward pressure to the left and
the right side (see Figure 5) in
order to snap it gently back in to
place.