Honda HSM1180i Manuel De L'utilisateur page 99

Emergency transport
You can transport the snowblower by pushing or pulling it without the
motor power.
1. Remove the cotter pins from the rear right and left wheels.
2. Remove the wheel pins from the rear right and left wheels.
3. The track rotates freely, allowing the operator to transport the
snowblower when it comes to have a trouble such as motor
malfunction.
Before removing the wheel pins, make sure to stop the rotating
parts, stop the engine and remove the engine switch key.
Do not remove the wheel pins on the slope. The snowblower may
move unintentionally, causing injury.
Place the snowblower on the level ground after transportation and
use a new cotter pin when replacing the wheel pin.
94
WHEEL PIN
COTTER PIN