Honda HSM1180i Manuel De L'utilisateur page 88

Self-diagnosis function
When a trouble occurs
When a trouble occurs to the snowblower during running, the drive
control warning indicator (orange) repeats blinking by the number
that corresponds to the type of the trouble. Turn the engine switch
to the STOP position and turn it to the ON position again. If the
snowblower is faulty, the drive control warning indicator (red)
comes on and the drive control warning indicator (orange) repeats
blinking by the number that corresponds to the type of the trouble
(see pages 84 and
DRIVE CONTROL WARNING
INDICATOR (red)
The drive control warning indicator (orange) comes on for 0.5
seconds, then it goes off for 0.5 seconds. It repeats blinking by the
number corresponding to the type of the trouble, then it goes off for
3 seconds. The drive control warning indicator (orange) repeats this
cycle of blinking and going off.
0.5 sec
LIGHT ON
LIGHT OFF
Example: When the indicator blinks twice:
It comes on for 0.5 seconds, goes off for 0.5 seconds, comes on for
0.5 seconds again and then goes off for 3.5 seconds. The indicator
repeats this cycle of operation.
85 ).
0.5 sec
0.5 sec 3.5 sec
ONE PERIOD
DRIVE CONTROL WARNING
INDICATOR (orange)
83