Honda HSM1180i Manuel De L'utilisateur page 54

6. Squeeze the drive clutch lever.
Before squeezing the lever, make sure the main shift lever is in the N
(neutral) position.
By squeezing the drive clutch lever, the auger clutch switch will be
remain on and you can operate the auger without holding the auger
clutch switch. Push the auger clutch switch again stops the auger.
ENGAGED
DRIVE CLUTCH LEVER
7. Push the auger clutch switch.
The indicator will come on, the auger will start to rotate and clear
snow while you are pushing the auger clutch switch.
Releasing the switch turns off the indicator and stops the auger in a
few seconds.
AUGER CLUTCH SWITCH
AUGER CLUTCH SWITCH
ON
OFF
ON
OFF
49