Honda HSM1180i Manuel De L'utilisateur page 94

Can not clear snow well.
SYMPTOM
S n o w d o e s n o t
come out from the
s n o w d i s c h a r g e
chute.
Hard to collect the
snow to clear.
Blower does not
rotate.
A u g e r d o e s n o t
rotate.
POSSIBLE CAUSE
Snow discharge chute is
clogged.
Snow is stuck on the
auger.
Blower shear bolt is
broken.
Drive motor overheated
b y o p e r a t i o n u n d e r
excessive load, which
armed the protection
function.
Blower does not rotate
when pressing the auger
clutch switch.
Auger shear bolt is broken.
Drive motor overheated
b y o p e r a t i o n u n d e r
excessive load, which
armed the protection
function.
Blower does not rotate
when pressing the auger
clutch switch.
REMEDY
Use the snow drop bar and
remove the snow from the snow
discharge chute (see page 59).
Remove the snow from the
snow discharge chute and the
related parts (see page 59).
Inspection or replacement of
blower shear bolt (see page 35
and 74).
Turn the engine switch to the
''OFF'' position and wait for a
while before turning it to the
''ON'' position again. Motor
protection function (see page
54).
Switch or electromagnetic
clutch might be faulty. Consult
with an authorized Honda dealer.
Inspection or replacement of
auger shear bolt (see page 35
and 74).
Turn the engine switch to the
''OFF'' position and wait for a
while before turning it to the
''ON'' position again. Motor
protection function (see page
54).
Switch or electromagnetic
clutch might be faulty. Consult
an authorized Honda dealer.
89