Honda HSM1180i Manuel De L'utilisateur page 81

Fuse
In the event of a burned out fuse, replace it with another fuse of the
rated capacity only after investigating the cause for the failure. If the
fuse is replaced without correcting the reason for the failure, the new
fuse may burn out quickly again.
Never replace a burned out fuse with any object other than another
fuse of the rated capacity. Using any other object such as wire or
aluminum foil may cause fires in wiring or other parts.
Block fuse replacement requires specific tools. Ask an authorized
Honda snowblower dealer for replacement.
Fuse replacement (blade fuse only)
1. Remove the rear cover (see page
2. Open the fuse box cover.
3. Replace the fuse as shown.
4. Close the fuse box cover.
5. Reinstall the rear cover (see page
(Blade fuses)
10 A (MAIN)
FUSE BOX COVER
SPARE FUSE (3 A)
(Block fuses)
80 A (LEFT MOTOR)
76
30 A (CHUTER)
SPARE FUSE (5 A)
80 A (RIGHT MOTOR)
).
33
).
33
3 A (ICS)
5 A (INDICATORS)
FUSE BOX COVERS
5 A (HEADLIGHT)
5 A (AUGER CLUTCH)
70 A (CHARGING)
30 A (AUGER
HEIGHT/ROLLING)