Spare Parts; Disposal; Oils And Lubricants; Protective Clothing - Wilo Vardo WEEDLESS-F Notice De Montage Et De Mise En Service

en
11

Spare parts

12

Disposal

12.1

Oils and lubricants

12.2

Protective clothing

12.3 Information on the collection of
used electrical and electronic
products
13

Appendix

13.1

Shrink disc tightening torques

262
Spare parts
Spare parts are ordered via customer service. To avoid return queries and incorrect or-
ders, the serial or article number must always be supplied. Subject to change without
prior notice!
Operating fluid must be collected in suitable tanks and disposed of in accordance with
the locally applicable guidelines.
Used protective clothing must be disposed of in accordance with the locally applicable
guidelines.
Proper disposal and appropriate recycling of this product prevents damage to the envi-
ronment and danger to your personal health.
NOTICE
Disposal in domestic waste is forbidden!
In the European Union, this symbol can appear on the product, the packaging or the
accompanying documentation. It means that the electrical and electronic products
in question must not be disposed of along with domestic waste.
To ensure proper handling, recycling and disposal of the used products in question,
please note the following points:
▪ Only hand over these products at designated, certified collecting points.
▪ Observe the locally applicable regulations!
Please consult your local municipality, the nearest waste disposal site, or the dealer who
sold the product to you for information on proper disposal. Further recycling informa-
tion can be found at www.wilo-recycling.com.
Steel mixer shaft
Size
Shrink disc Mixer
inside diameter
5
D62
6
D75
7
D90
8
D100
Stainless steel mixer shaft
Size
Shrink disc Mixer
inside diameter
5
D62
6
D75
7
D90
8
D100
Mixer shaft Thread
70.0 x 12.5 M6
88.9 x 16.0 M8
101.6 x 17.5 M8
114.3 x 20 M8
Mixer shaft Thread
71/45 M6
90/56 M8
95/67 M8
106/71 M8
WILO GVA GmbH 2019-02
Tightening
torque
12 Nm (9 ft·lb)
30 Nm
(22 ft·lb)
30 Nm
(22 ft·lb)
30 Nm
(22 ft·lb)
Tightening
torque
6.8 Nm (5 ft·lb)
16 Nm
(12 ft·lb)
16 Nm
(12 ft·lb)
16 Nm
(12 ft·lb)