Wilo Vardo WEEDLESS-F Notice De Montage Et De Mise En Service page 251

Masquer les pouces Voir aussi pour Vardo WEEDLESS-F:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 336
Installation and operating instructions Wilo-Vardo WEEDLESS-F
Shut-down/dismantling
DANGER
Danger from fluids hazardous to health!
Risk of fatal injury if the mixer is used in fluids hazardous to health.
• Decontaminate the mixer after dismantling and before carrying out any other
work.
• Observe the specifications provided by work regulations. The operator must
make sure that personnel have received and read work regulations.
DANGER
Risk of death due to electrocution!
Improper conduct when carrying out electrical work can lead to death due to electric
shock! Electrical work must be carried out by a qualified electrician in accordance
with the locally applicable regulations.
DANGER
Risk of fatal injury due to dangerous lone working practices!
Work in chambers and narrow rooms as well as work involving risk of falling are dan-
gerous work. Such work may not be carried out autonomously! A second person
must be present for safety reasons.
WARNING
A lack of protective equipment may result in hand and foot injuries or the
risk of falling!
Danger of (serious) injuries during work. Wear the following protective equipment:
• Safety gloves for protection against cuts
• Safety shoes
• Safety harness
• Safety helmet must be worn if lifting equipment is used!
WARNING
Risk of burns from hot surfaces!
Motor housing can become hot during operation. It may cause burns. Allow the mo-
tor to cool down at ambient temperature after switching it off!
NOTICE
Only use properly functioning hoisting and lifting gear!
Only use properly functioning hoisting gear to lift and lower the mixer. Screw the
lifting eyes needed for attachment to the motor plate. Ensure that the mixer is not
damaged during lifting and lowering. Do not exceed the maximum permissible bear-
ing capacity of the lifting equipment. Check that lifting equipment is functioning
properly before use!
Remove by performing the following steps:
NOTICE
Work steps for dismantling
The individual components are dismantled in reverse order to assembly.
Mixer decommissioned.
en
251

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Vardo weedless-sVardo weedless-m

Table des Matières