Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
TECHNICAL SPECIFICATIONS
Mechanical specifications
Component
Material
Display module
PC / PBT
Conditions of use
Ambient temperature:
-10 to +60°C
Air humidity:
< 85%, non condensated
Conformity to standards and
directives
The accessory conforms to the CE directives through the
following standards:
EMC: EN 61000-6-2, EN 61000-6-3
English
8
Removing the cover of the
measuring device
NOTE
The tightness of the measuring device is not guar-
anteed when the cover is removed.
• Take any precautions necessary to prevent the projection
of fluids inside the box.
The measuring device may be damaged if a metal
component comes into contact with the electronics.
• Take any precautions necessary to prevent contact of
the electronics with a metal component.
→
2
→
1
In case, the cover grips to the
housing:
→
→
→
English
10
[1] Turn the cover counter-
clockwise with an angle of
about 15° to unlock it.
[2] Remove the cover.
Use an appropriate tool to
unlock the cover, taking care not
to scratch the glass.
Insert an appropriate tool into
the groove of the housing.
Lever the cover up.
ASSEMBLY
Safety instructions
DANGER
Risk of injury due to electrical discharge.
• Before starting work, switch off the power supply and
secure it to prevent restarting.
• Observe all applicable accident protection and safety
guidelines for electrical equipment.
WARNING
Risk of injury due to non-conforming assembly.
• The accessory must only be assembled by qualified and
skilled staff with the appropriate tools.
Risk of injury due to unintentional switch on of power
supply or uncontrolled restarting of the installation.
• Take appropriate measures to avoid unintentional activa-
tion of the installation.
• Guarantee a set or controlled restarting of the process
subsequent to the assembly of the accessory.
Fitting the display module
20°
a)
c)
b)
d)
English
→
Remove the cover (see
page 10).
→
Set the display module
at an angle of about 20°
in relation to the desired
position.
→
The module can be
mounted in 4 dif-
ferent positions, at 90°
intervals.
→
Fully push in the module
and turn clockwise to
lock it.
English
11
11
9
9
Publicité
Table des Matières
