Programming Cycle User Mode; Product Name - Nuova Simonelli MICROBAR II Manuel D'instructions

EN
Once the ejection cycle is over, the unit will enter
resting phase position and the display will show
the first item on the programming menu:
Language
KEY FUNCTIONS
: Scrolling of the list of Programmable
functions and/or decreasing / increasing
values.
ENTER: Menu access and data confirmation.
RESET: Return to the previous menu.
5.3 PROGRAMMING
EXIT
To exit the programming environment both USER
and TECHNICIAN, scroll through all the functions
using the key until the display reads:
Machine Ready
Day
5.4 PROGRAMMING CYCLE
USER MODE
1. LANGUAGE
Press the ENTER key to access the set-
ting. This sets the language of the operator-
machine interface, as shown on the display.
Language
The available languages are as follows:
Italian
English
Spanish
German
French
Dutch
KEY FUNCTIONS
: Scrolling of language list.
ENTER: Confirmation of the selected language.
RESET: Return to the previous menu.
Hour
Swedish
Danish
Finnish
Norwegian
Russian
Japanese
2.

PRODUCT NAME:

Press the ENTER key to access the setting. A
beverage is assigned to each key. Example:
Product Name:
In this case the beverage 'Espresso' is assigned to
1
key number .
KEY FUNCTIONS
: Scrolling of beverages for each key.
The ENTER key confirms the type of
beverage for the key number being taken
into consideration and then passes on to
the beverage of the next key.
RESET: Return to the previous menu.
The programmable keys are the following:
Once the programming of the final key has been
completed, pressing ENTER the next menu item is
accessed.
NOTE: The keys
programmed for both milk-based beverages
and coffee drinks.
The keys
grammed only for coffee beverages.
NOTE: The function DISABLE can be assigned
to each key and in this case the key is
disabled.
1
Espresso
can be
can be pro-
57