Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
EN
6.
SPECIAL MACHINE CALIBRATION FUNCTIONS
6.1
RESETTING THE
CLEANING FILTER
LITRE COUNTER
This function allows you to reset the total amount of
water used.
Proceed as follows:
Disconnect the machine by turning the main
switch off (OFF).
Connect the machine by turning the main switch
on (ON) and simultaneously pressing down on
the key:
until the display reads:
Reset H2O Filter
Please Wait
6.2
RESETTING
WASHING CYCLES
This function makes it possible to reset the total
number of washing cycles.
Proceed as follows:
Disconnect the machine by turning the main
switch off (OFF).
Connect the machine by turning the main switch
on (ON) and simultaneously pressing down on
the key:
until the display reads:
Reset Clean
Please Wait
6.3
RESETTING
MACHINE PARAMETRES
This function makes it possible to remove incor-
rect functioning data and to reinstate the Standard
Programming settings (see PRESET SETTINGS
chart). Proceed as follows:
Disconnect the machine by turning the main
switch off (OFF).
Connect the machine by turning the main switch
on (ON) and simultaneously pressing down on
the keys
1
ENTER
3
and RESET
;
7
5
until the display reads:
Please Wait
Preset Data
6.4
MANUAL HANDLING
OF COFFEE DELIVERY
GROUP
This function makes it possible to activate the motor
manually forming the automation of the manual cof-
fee delivery group. Proceed as follows:
Disconnect the machine by turning the main
switch off (OFF).
Connect the machine by turning the main switch
on (ON) and simultaneously pressing down
on the arrow keys
until the display reads:
Manual Movement
IMPORTANT:
When the machine is switched
on, since the arrow key
to access this site, the piston will
automatically start to move down-
wards.
Press the arrow key
DOWNWARDS.
Press the arrow key
UPWARDS.
Release and reinstate voltage using the main
switch to end the procedure.
2
4
and
;
is used
4
to move the piston
2
to move the piston
57
Publicité
Chapitres
Table des Matières
