Programming - Nuova Simonelli MICROBAR II Manuel D'instructions

5.

PROGRAMMING

5.1 STANDARD KEYBOARD
3
1
4
2
ENTER key:
1
Cursor keys:
2
4
RESET Key:
3
LIST OF PROGRAMMABLE FUNCTIONS
Functions that can be accessed from the USER and
TECHNICIAN modes.
1. LANGUAGE
2. PRODUCT NAME
3. DOSE PROGR.
4. GRINDER PROGR.
5. MILK DOSE (CAPPUCCINO version)
6. DATE/TIME
7. ON/OFF PROGR.
8. ENERGY SAVING
Functions that can "ONLY" be accessed from the
TECHNICIAN mode.
THIS OPERATION MAY ONLY BE
PERFORMED
TECHNICIAN.
ADJUSTMENTS MADE BY UNQUALIFIED
TECHNICIANS OR OTHER PEOPLE MAY
RENDER THE GUARANTEE NULL AND
VOID.
56
5 7
6 8
Fig. 23
used to enter menus
and/or to confirm values
and pass on to the next
step.
used to scroll through
the menus and to
increase / decrease
value settings.
to confirm and go back
to the previous step.
BY A SKILLED
Additional functions that can be accessed from the
TECHNICIAN mode are:
9. PREINFUSION
10. TAMPING
11. GROUNDS NUMBER
12. MILK CLEANING AL.
13. CLEANING ALARM
14. RINSING UNIT
15. GROUP 1 ADJUSTMENT
16. GROUP 2 ADJUSTMENT
17. COFFEE TEMP.
18. STEAM TEMP.
19 TOTAL COUNT
20. PASSWORD
21. WATER FILTER L
22. DE-SCALE
5.2 PROGRAMMING
Entering the programming function gives access to
all of the USER and TECHNICIAN mode functions.
To access the programming environment, proceed
as follows:
NOTE: The procedure is possible also with the
appliance on.
Insert the key in the lock.
Turn the Front panel key counter-clockwise.
Open the Front panel and the display will show:
Machine Off
Front Panel Open
Keeping the ENTER key pressed, close the front
panel, the display will read:
Please Wait
Heating
EN