Programming; Entering The Programming Mode; Programming In User Mode - Nuova Simonelli TALENTO Notice D'instructions

7.

PROGRAMMING

7.1 ENTERING THE
PROGRAMMING MODE
Hold down the ON/OFF
machine switched off (approx. 5 seconds) until the
display shows the first programming function:
LANGUAGE
The keys available during the programming stage
are:
ENTER key:
CURSORS key:
RESET key:
LIST OF PROGRAMMABLE FUNCTIONS
Functions that can be accessed from the USER and
TECHNICIAN modes:
1. LANGUAGE (LANGUAGE SELECTION)
Functions "ONLY" accessible in USER MODE.
2. COUNTERS
3. PROG DOSES
4. SETTINGS
5. SAVE DATA
44
key with the
To enter the menu and/or
confirm the setting.
To scroll through the
menu and increase/
reduce settings.
To go back to the previous
step.
7.2 PROGRAMMING IN
USER MODE
1 . LANGUAGE
Press the
required language.
The possible languages are as follows: ENGLISH,
ITALIANO, FRANCAIS, DEUTSCH, ESPANOL.
onfirm your selection and move to the next function
by pressing ENTER
To access the functions that can only be programmed
in USER MODE, press the up arrow
SELECT LANGUAGE menu and the display will read:
PASSWORD
Enter the correct password to access the first item in
the programming menu that can be accessed from
the USER MODE.
The default PASSWORD setting is 4 times the LEFT
GRINDER:
2. COUNTERS
Pressing the ENTER
enter the submenu.
2.1 DRINK COUNT
(Beverage count)
Press ENTER to enter the sub menu; all of
the beverage keys (1-10) will start to flash.
EN
keys to select the
.
from the
key it is possible to