Guarantee And Limitation Of Liability; Ce Declaration Of Conformity - Multiplex PROFI TX 16 MasterEdition Mode D'emploi

Contents
1. Introduction ........................................................... 10

1.1. Guarantee and limitation of liability .......................... 10

1.2. CE declaration of conformity ................................... 10

1.3. Disposal ................................................................ 11
1.4. Safety information .................................................. 11
2. Overview new functionalities ................................... 12
1. Introduction
Congratulations on purchasing your new radio control set, we are delighted you have chosen the MasterEdition of the MULTIPLEX
PROFI TX. In doing so, you now own a powerful piece of equipment, with which you can enjoy your hobby of building remote
controlled models without restriction. We hope you enjoy it and wish you the best of luck with your new equipment.
1.1. Guarantee and limitation of liability
MULTIPLEX Modellsport GmbH & Co.KG does not assume
any liability for loss, damage or costs which arise through
the improper use and operation of our products, or which
are connected with such operation in any way. As far as is
legally permissible, the obligation of MULTIPLEX Modellsport
GmbH & Co.KG to provide compensation for damages, on
whatever legal basis, is limited to the invoice amount of the
quantity of MULTIPLEX Modellsport GmbH & Co.KG goods that
were directly affected by whatever incident gave rise to the
damage. This does not apply if MULTIPLEX Modellsport GmbH
& Co.KG is obliged to accept unlimited liability in accordance
with mandatory law for deliberate or gross negligence.
Our products are covered by the currently valid statutory guar-
antee regulations. If you wish to make a claim under guar-
antee, please contact the model shop where you purchased
the product.
The guarantee does not cover malfunctions caused by the
following:
1.2. CE declaration of conformity
The device was evaluated according to directives harmonized with European legislation. You are therefore in po session
of a product whose construction satis es the protection objectives of the European Community for the safe operation
of devices. You can nd the exhaustive CE declaration of conformity as a PDF document online at www.multiplex-rc.de in the
DOWNLOADS section under PRODUKT-INFOS.
10
3. Menu setup ........................................................... 13
4. Control functions (controller options) ...................... 15
5. Servo .................................................................... 16
6. Timer .................................................................... 16
7. Memory\Model templates ....................................... 17
· Improper Operation
· Maintenance that was performed incorrectly, late or not at
all, or performed by a non-authorized body
· Incorrect connections
· Use of non-original MULTIPLEX accessories
· Modi cations/repairs that were not carried out by
MULTIPLEX or a MULTIPLEX Service Centre
· Accidental or deliberate damage
· Faults due to normal wear and tear
· Operation outside the technical speci cations or in
connection with components from other manufacturers.
MULTIPLEX Modellsport GmbH & Co.KG
Westliche Gewerbestraße 1
D-75015 Bretten-Gölshausen
MULTIPLEX/HiTEC Service:
+49 (0) 7252 - 5 80 93 33