Memory\Model Templates - Multiplex PROFI TX 16 MasterEdition Mode D'emploi

7. Memory\Model templates

Glider+ servo mapping
# Servo name Mix inputs
1 AILERON+ Aileron, spoiler, aps, elevator trim
2 ELEVATOR+ Elevator, spoiler, aps, throttle trim
3 Rudder Trim switched off
4 Throttle –
5 AILERON+ Aileron, spoiler, aps, elevator trim
6 FLAPS-1+ Flaps, spoiler, ailerons, elevator trim
Wingstabi servo mapping
# Servo name Properties
1 Ailerons Trim switched off
2 Elevator Trim switched off
3 Rudder Trim switched off
4 Throttle Flight phase trim switching
switched off
5 Gyro phase WINGSTABI phase switching
6 Sensitivity Sensitivity of the Wingstabi, com-
bined for all three axes
Multicopter servo mapping
# Servo name Properties
1 Roll Aileron
2 Pitch Pitch (elevator)
3 Vertical Up/DOWN (throttle joystick)
4 Yaw Rotation (rudder)
5 Flight mode Flight phase switching
6 Gimbal_X Move camera
7 Gimbal_Y Move camera
8 Shutter Trigger camera
7 FLAPS-1+ Flaps, spoiler, ailerons, elevator trim
8 FLAPS-2+ Flaps, spoiler, ailerons, elevator trim
9 FLAPS-2+ Flaps, spoiler, ailerons, elevator trim
10 FLAPS-3+ Flaps, spoiler, ailerons, elevator trim
11 FLAPS-3+ Flaps, spoiler, ailerons, elevator trim
12 Spoilers –
7 Aileron trim Aileron trim
8 Elevator trim Elevator trim
9 Rudder trim Rudder trim
10 Flap phase Wingstabi phase switching for the
ap control
11 Gyro phase4 Fourth Wingstabi gyro phase
12 Flap phase4 Fourth phase for the ap control
17