Using The Lower Connectors; Using The Versa-Tether - Britax Frontier XT SICT Guide D'utilisation

Child Seat Functions

Using the Lower Connectors

The lower connectors are located on the sides of the shell in the
storage slots. Store the lower connectors when not in use.
To.remove.the.lower.connector.from.the.storage.slot.or.lower.
anchor:
Press and hold the red release
1
button.
Pull the lower connector
2
from the storage slot or lower
anchor.
To.attach.the.lower.connector.to.the.storage.slot.or.lower.
anchor:
Firmly push the lower connector
into the slot or lower anchor until a
click is heard to store.
NOTE: The lower connectors store
in the slots with the top down.

Using the Versa-Tether

WARNING!
• Attach the Versa-Tether only to tether anchors identified by
your vehicle manufacturer as tether anchorage points.
• If your vehicle does not currently have a tether anchor
attachment, refer to your vehicle owner's manual or
contact your vehicle man u fac tur er for assistance. DO
NOT modify your vehicle without advice from your vehicle
manufacturer.
When using the child seat in harness mode:
• The Versa-Tether MUST be used at all times with this child
restraint. Using the tether will improve the stability of your
child seat and reduce the risk of injury.
18
Top
®
Tether anchor locations vary
from vehicle to vehicle. Check
your vehicle owner's manual
and look for the tether anchor
symbol shown in the diagram
to help identify where the top
tether anchor point is located
in your vehicle.
To.remove.the.Versa-Tether.from.the.storage.clip:
Remove the webbing from the
1
elastic strap and loosen the
Versa-Tether.
Remove the Versa-Tether
2
hook from the storage clip.
To.attach.the.Versa-Tether.to.the.storage.clip.or.a.tether.
anchor:
Firmly press the hook over the
1
storage clip or tether anchor
point.
Always attach the hook over
2
the anchor point.
IMPORTANT: Use the elastic strap
to contain extra webbing. Always
ensure any excess webbing is
contained within your vehicle.
Child Seat Functions
OR
OR
®
OR
OR
19