Installing.the.child.seat; General Information; Harness Mode; Booster Mode - Britax Frontier XT SICT Guide D'utilisation

Installing the Child Seat

General Information

WARNING!
• Long belt path is only for use with a lap-shoulder belt. Never
use the long belt path option with the LUAS or a lap belt.
• Use only the vehicle's lap and shoulder belt system when
restraining a child in booster mode. Never restrain a child with
only a lap belt in booster mode.
• Install forward-facing only.
• DO NOT use anything to raise the child seat off the vehicle seat.
• Refer to your vehicle owner's manual or contact the vehicle
manufacturer for the maximum weight rating for the LUAS
anchors in your vehicle. Use the vehicle seat belt (not lower
connectors) for installations with children who weigh more than
the vehicle LUAS anchor limit. Unless specified otherwise by
the vehicle manufacturer, assume a 18.1 kg (40 lb) child is the
vehicle LUAS anchor limit.
Harness.Mode
• The positioning block must be
rotated to the front when installing
the child seat in harness mode.
• Based on your vehicle's seat belt
configuration, you may achieve
a more secure installation
using one of two approved
lap-shoulder belt path options
(long or short belt path). If the
first installation method results in
more than 2.5 cm (1 in.) of front-to-back or side-to-side movement
at the belt path, try the other option. See page 24 for information on
selecting a belt path to install this child seat in your vehicle.
• Use this child seat in harness mode with children at least 2 years of
age and 11.3 – 29.5 kg (25 – 65 lbs) who stand 76.2 – 144.8 cm (30
– 57 in.) in height. Britax recommends using harness mode to 65 lbs
(29.5 kg). See the Child Seat Fit Requirements section on page 6 for
information on when your child has outgrown harness mode.
20
Positioning
Block
Booster.Mode
• The positioning block must
be rotated to the back when
positioning the child seat in

booster mode.

• This child seat can be used in
booster mode with children who
stand 106.7 – 165.1 cm (42 – 65
in.) in height and weigh more
than 18.1 kg (40 lbs). Britax
recommends using harness
mode to 29.5 kg (65 lbs).
• When positioning this child
seat in booster mode use the
vehicle's lap-shoulder belt to
secure the child and child seat
into the desired seating position.
• In booster mode, this child seat
can be positioned on the vehicle
seat using the LUAS. Use the
vehicle's lap-shoulder belt to secure the child. Ensure that the LUAS
system does not interfere with the vehicle seat belt function and
alignment when securing your child.
Installing the Child Seat
Positioning
Block
21