Britax Frontier XT SICT Guide D'utilisation page 10

Child Seat Functions
Fastening the Buckle
Insert one tongue at a time into
the buckle.
NOTE: Proper connection is
confirmed with an audible click
after inserting each buckle
tongue.
Using the Chest Clip
Squeeze to Push together to fasten
1 2
open
NOTE: Always position the chest clip at
armpit level.
Using the Positioning Block
NOTE: Set the positioning block position BEFORE installing.
Unhook the Versa-Tether from
1
the storage clip
Harness Position
2
16
Releasing the Buckle
Press the release button and
pull the tongues from the
buckle.
NOTE: Periodically clean
the buckle to ensure proper
operation. See Page 46.
Positioning
Block
Booster Position
3
Using the Lower Universal Anchorage System (LUAS)
and Tether
The figure above shows typical locations for lower anchors and
tether anchors in a vehicle. Check your vehicle owner's manual for
the exact LUAS anchor locations and seating positions (if equipped),
information on use with a child seat, and for the maximum weight
rating for the LUAS anchors.
Standard vehicle seat spacing between LUAS anchors is 27.9 cm
(11 inches). This child seat can be used in a seating position with
up to 50.8 cm (20 inches) of space between the LUAS anchors if the
vehicle manufacturer allows.
Child Seat Functions
Positioning
Block
17