Extraordinary Maintenance - Tecno-gaz STERILAIR 3000 Mode D'emploi

EXTRAORDINARY MAINTENANCE

Verify that the blades of the extractor fan
are not covered by dust or that some
foreign bodies are not present.
If these problems should verify, proceed
at the cleaning as follows:
Switch off and disconnect the device
from the electricity before opening the
cover.
Unscrew the two screws POS 6 on the
cap and remove the cap.
Insert the pipe of the hoover and clean
without knocking the blades of the
extractor.
Replace the cap fixing it with its screws
and close the device.
If you should find some difficulties
please contact the after sales service.
DSAF078_REV2.doc
FIG03
FIG04
30