COOKTOP CONTROLS
1.
Remove knobs.
Pull the knobs straight away from the control panel to remove.
2.
Clean with warm, soapy water.
Know Your Cooktop Controls
To avoid damage to the cooktop controls, do not use steel
■
wool, abrasive cleansers, or oven cleaner.
To avoid damage, do not soak knobs.
■
When replacing knobs, make sure knobs are in the OFF
■
position.
Do not remove seals under knobs.
■
When replacing knobs after cleaning either the surface
■
burner controls or the griddle module control, make sure
the knobs are replaced to the correct location. The power
burner knobs have power settings, and the griddle knob
has temperature settings. All other knobs have Hi, Med, Lo
settings only.
STAINLESS STEEL
(ON SOME MODELS)
Use cleaner or wipes.
Use affresh
Stainless Steel Cleaner or affresh
®
Cleaning Wipes (not included). Rub in direction of grain to avoid
possible damage to the steel surface.
Do not use:
Soap-filled scouring pads
■
Abrasive cleaners
■
Cooktop polishing creme
■
Steel-wool pads
■
Gritty washcloths
■
Abrasive paper towels
■
CARE AND CLEANING
CONTROL PANEL
1.
Activate the lock buttons. Touch and hold START until
"controls locked" appears in the display and a confirmation
tone sounds.
Locking buttons avoids touch screen activation during cleaning.
2.
Apply cleaner.
Apply glass cleaner to soft cloth or sponge – not directly on panel,
or use affresh
Do not use:
Abrasive cleaners
■
Steel-wool pads
■
Gritty washcloths
■
Abrasive paper towels
■
When replacing knobs after cleaning either the surface
■
burner controls or the griddle module control, make sure
the knobs are replaced to the correct location. The power
burner knobs have power settings, and the griddle knob
has temperature settings. All other knobs have Hi, Med, Lo
settings only.
DOOR EXTERIOR
Apply cleaner.
Stainless Steel
®
Apply glass cleaner to soft cloth or sponge – not directly on panel,
or use affresh
Kitchen and Appliance Cleaner (not included).
®
Kitchen and Appliance Cleaner (not included).
®
31