Care And Cleaning; Cooktop Surface; Sealed Surface Burners - KitchenAid KDRU783V Guide D'utilisation Et D'entretien

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

COOKTOP SURFACE

After Each Use:
1.
Wipe off cooktop, grates, and caps.
2.
Clean food spills.
To preserve the finish, clean food spills containing acids, such as
vinegar and tomato, as soon as the entire appliance is cool.

SEALED SURFACE BURNERS

1.
Remove burner cap and base.
2.
Wipe off cooktop, grates, and caps.
3.
Clean clogged burner ports.
Use a straight pin. Do not enlarge or distort the port. Do not use
a wooden toothpick. If the burner needs to be adjusted, contact
a trained repair specialist.

CARE AND CLEANING

4.
Replace burner cap.
Dual-Flame Burner
1
2
Medium Burner
1
2
Simmer/Melt Burner
1
2
Make sure alignment pins are properly aligned with burner cap.
5.
Turn on burner.
If the burner does not light, check cap alignment. If the burner
still does not light, do not service the sealed burner yourself.
Contact a trained repair specialist.
Incorrect
1
Correct
2
Incorrect
1
Correct
2
Incorrect
1
Correct
2
29

Publicité

Table des Matières
loading

Table des Matières