BWT EES Notice De Montage page 45

Part qty
Cell 1
Cell unions 2
Cell lid 1
Flow sensor and
temperature 1
sensor
Acid dosing pump 1
Sensor mounting
1
Tee
pH sensor 1
Redox sensor 1
63-50 reduction
*
fittings
TRAITEMENT DE L'EAU
Comments
From the exterior, the cell looks
identical for all the models.
The cell for the 80 m3 models
features 3 electrodes (plates),
the cell for the 150 m3 models
features 5 electrodes.
63 mm, solvent unions
The lid may be used to plug
one end of the cell in order
to pour in a descaling bath
(manual descaling)
The flow sensor is premounted
on a Tee, diameter 63 mm.
The temperature sensor is
positionned on the Tee at the
base of the flow sensor. Both
are connected to a terminal in
the control panel.
The acid dosing pump is used
to inject acid into the hydraulic
circuit.
The acid dosing pump kit
includes: 2 saddles (50 +
63mm), 3/8" to 1/2" adaptor,
a check valve valve, internal
replacement tube, 2 x 3m
polyethylene tube, foot filter
and weight
Tee, diameter 63 mm, with two
63/50 reduction fittings
2 for the flow sensor tee, 2
for the sensor tees, 2 for the
cell barrel unions, or for the
assembly (cell + acid dosing
pump)
EES
2021/02 - Indice de révision : E - Code : 29650
EES Pro
X X
X X
X X
X X
X X
X X
X X
X X
X X
45/80