Siemens SIMOTICS 1PH818 Série Instructions De Service Et De Montage page 164

Moteur synchrone
Masquer les pouces Voir aussi pour SIMOTICS 1PH818 Série:
Table des Matières

Publicité

Service Instructions NFF
Electromagnetic Double Face Spring – Applied Brake
10
Spare parts stocking, after-sales service
10.1
Spare parts stocking
Stocking of spare and parts subject to wear is an important precondition for permanent and
reliable functioning of the brake.
Friction disc (2), armature disc (10), brake flange (11) and pinion (15) (for item see Chapter 4.1)
are parts subject to wear.
Warranty will be provided only for the original spare parts supplied by us. We expressly state
that the installation or use of spare parts other than the original ones supplied by us will
negatively affect the design characteristics of the brake and thus have an impact on active
and/or passive safety.
Stromag Dessau GmbH shall have no warranty obligations for any damage caused by the use
of spare parts or accessories other than the original ones supplied by us.
Please bear in mind that often particular manufacturing and delivery specifications exist for
parts manufactured by us or bought from others, and that we offer spare parts to the up-dated
technical conditions and the up-dated legal prescriptions.
10.2
Data for spare parts orders
Please specify the following details when ordering spare parts:
-
Series and size of brake
-
article code
-
Location and designation of spare part (see chapt. 4.1. and fig. 1)
-
Number of pieces
10.3
Address of after-sales service
This is our address for after-sales service and spare parts distribution:
If you require a service engineer, please contact our "Technical after-sales service" under the
above address.
164
IP 66
Stromag Dessau GmbH
Dessauer Str. 10
D-06844 Dessau-Roßlau
Telefon :
+49 (340) 2190-203
Telefax :
+49 (340) 2190-201
E-Mail
:
vertrieb.dessau@stromag.com
Internet :
http://www.stromag-dessau.de
Stromag Dessau
19
safety in motion
01.06.2009

Publicité

Chapitres

Table des Matières
loading

Table des Matières