Setup - Konica Minolta MULTI GLOSS 268 Mode D'emploi

15
48

Setup

You can make general settings in
the Setup menu, for example
Language or Display time.
Date/Time
The unit contains an integrated
clock. This makes the date and
time of the measurement available
for data transfer to a PC. The date
and time are not lost even when the
battery is changed. If you would
like to change the time setting, use
the scroll wheel to move the mark
to Date/Time and then press mode.
The display for setting the date and
time appears.
Beeper
You can use this menu option to
turn the beeper on or off. Use the
scroll wheel to move the mark to
Beeper and press the wheel.
When the beeper is turned on, a
check mark appears at the end of
the line.