Getting Started - Konica Minolta MULTI GLOSS 268 Mode D'emploi

5
18

Getting started

Turning on the unit and
measuring
To turn on the unit, press the mode
scroll wheel.
Information on the date and last
certification appears in the display.
If the device was turned on in its
holder, the autodiagnosis test is
performed (see the section on
Calibration).
Then the unit switches into the last
measurement mode to be selected.
Pressing operate initiates
measurements.
The display of measurement results
on the screen may be broken down
into the following elements:
A: When Difference measurement
is turned on, the name of the
reference that is selected is
displayed here.
B: If Save is selected, the memory
area that is selected appears at the
top left and for
C: the sample name (block name).
D: If Statistics or Continuous is
turned on, the number of measure-
ments performed or selected is
displayed here.