Konica Minolta MULTI GLOSS 268 Mode D'emploi page 41

13 Difference measurement and Pass/Fail
40
Now you can adjust the
corresponding value.
After the last number is activated,
the display jumps back to the
previous menu.
In this manner you can enter addi-
tional target and/or limit values for
the reference one after the other if
need be. After the entries are
complete, Difference measurement
is turned on with the new reference.
Change reference
You can use this function to change
target values and limit values of
saved references. You can also use
it to define limit values
subsequently (for example for a
measured reference). Use the scroll
wheel to move the mark to Change
reference and press the wheel.
All references are listed one after
the other in the following menu.
Select the desired reference and
press on the scroll wheel.
In the next step you can define the
target and limit values as was
previously described above.