Save - Konica Minolta MULTI GLOSS 268 Mode D'emploi

12
32

Save

Up to 999 measurements can be
stored. To save measurement
values, you must activate the Save
function before measuring or else
select or create an area in memory.
A fixed memory area is already
created for each geometry or
combination (e.g. M60°). These
memory areas cannot be deleted. A
total of 50 memory areas can be
created.
The Save function can be used for
sample mode, Statistics and
Continuous measurements. The
layout of the memory is such that
the measurement mode and
reference can be changed within a
memory area, but not the
geometry.
Save
You can use this function to turn
saving on or off. A check mark
indicates if the function has been
activated.
Turning on Save automatically
selects the area in memory that is
predefined for the currently set
geometry (for example M20°60°).