Konica Minolta MULTI GLOSS 268 Mode D'emploi page 42

Difference measurement and Pass/Fail 13
Delete reference
Use the selection wheel to move
the mark to Delete reference in the
Difference menu and then press on
the wheel.
The Delete reference menu
appears. All saved references are
listed in this menu.
If there are more references present
than can be shown in the display,
arrows on the right edge of the
display will point to additional
references.
Use the scroll wheel to move the
mark to the desired reference and
press the wheel.
The reference to be deleted is listed
again in the display. Confirm by
pressing the mode scroll wheel.
The unit then reverts to the
previous menu.
41