Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
13 Difference measurement and Pass/Fail
38
Select reference
To select an existing reference, use
the arrow to move the mark to
Select reference and then press the
wheel.
The first reference appears in the
display. The target value, minimum
and maximum are displayed. For
values that are not defined, 0.0 or
2000 is displayed. The name of the
reference appears inverted at the
top right.
Turning the scroll wheel causes the
next reference to be displayed.
When you have selected the
desired reference in the display,
activate it by pressing on the wheel.
A reference to the selected data will
appear in the display.
In addition, Difference
measurement is turned on and the
selected reference is activated.
Publicité
Table des Matières
