Fitting The Optional Bracket And Strain Relief Device For The Charger Lead; Preparations For Security Lock - Fronius Acctiva Seller Instructions De Service

Fitting the option-
al bracket and
strain relief de-
vice for the charg-
er lead
Preparations for
security lock
44
3
4
2
(1) (2) (3)
IMPORTANT! The torque for all screws is
2.5 Nm.
To fit the bracket:
- Undo screws (1)
- Fit bracket (2) using the previously re-
moved screws
To fit the strain-relief device:
- Undo screw (3)
1
- Fit charger lead strain relief device (4)
using the previously undone screw
(4)
The security lock is not contained in the
scope of supply.
A security lock can only be attached
- to the groove on the housing as shown
- to the groove on the housing that is ex-
actly opposite
- using spacer M8 DIN 125 or DIN 134,
located as shown