Locking System; Removing Covers For Connections And Options; Usb Update Option; Fitting The Optional Bracket And Strain-Relief Device For The Charging Lead - Fronius Acctiva Seller Instructions De Service

Locking system

Removing covers
for connections
and options
USB update The USB update option allows the charger to be updated directly via the USB interface.
option
Fitting the optio-
nal bracket and
strain-relief
device for the
charging lead
50
(2)
3
4
1
2
(1) (2) (3)
If necessary, use a screwdriver to remove:
(1)
- Cover (1) for connection P4 - Multi
Port.
- Cover (2) for connection P2 - I/O port.
Leave covers (1) and (2) in place on
unused P2 and P4 connections.
Please note:
the torque for all screws is 2.5 Nm (1.84 ft.
lb.).
To fit the bracket:
- Undo the screws (1).
- Fit bracket (2) using the previously
removed screws.
To fit the strain-relief device:
- Undo screw (3).
- Fit charging lead strain-relief device
(4) using the previously undone
screw.
(4)