Removing The Cover; Fitting The Optional Bracket And Strain Relief Device - Fronius Acctiva Twin 15 A Instructions De Service

Removing the
cover
IMPORTANT! The cover (4) must be fitted on connection P2 if only one battery (P1) is be-
ing charged.
Fitting the option-
al bracket and
strain relief de-
vice
(1) (2)
(4)
1
1
2
(1) (2) (3)
If necessary, use a screwdriver to remove:
(3)
- Display (1)
- Cover (2) for connection P3 - visual
port
- Cover (3) for connection P4 - multiport
If necessary, use a pair of pliers to remove:
- cover (4) from P2 connection - char-
ging cable socket
IMPORTANT! The torque for all screws is
2.5 Nm.
- Undo three screws (1)
- Fit bracket (2) using the previously re-
moved screws (1)
- Undo screw (3)
- Fit charging cable strain relief device
(4) using the previously undone screw
(3)
(4)
47