Extra Safety - ETNA A361KZT Notice D'utilisation

Easy Cook function
The Easy Cook function is suitable for bringing
food to the boil rapidly and then continue cooking
at a lower setting. The hob will automatically
switch to the lower setting to finish cooking.
1. Put a pan on a cooking zone.
2. For the zone required, turn the knob
anticlockwise or fully to the right. "A" appears
in the display.
3. Set the desired heat-through setting within
5 seconds using the rotary knob. If you do not
set a heat-through setting, the zone will be
turned off.
Once the heat-through setting has been set, the
display will alternately flash "A" and the set
heat-through setting. After the cooking time has
elapsed, the flashing stops and the heat-through
setting will be continuously shown in the display.
Turn the cooking machine off by turning the knob
back to stetting 0 or further to setting 9.
Setting 9
Only switch the hob on at setting 9 if you want
to boil water. This setting is too high for heating
butter or milk and much too high for defrosting.
Consult the cooking tables in the section
"Comfortable cooking" to help you learn the
techniques.
Residual heat indicator
After intensive use of a cooking zone, the cooking
zone can stay hot for some minutes.
As long as the cooking zone is hot, the display will
show H.
Cooking-time limiter
The cooking-time limiter switches the cooking
zones off after a certain time. The cooking-
time limiter is a safety function of your cooking
appliance. It will operate if you forget to switch
off your hob. The hob can easily be turned back on
after it has been turned off. The time depends on
the set cooking setting:
Setting Minutes
1 520
2 402
3 318
4 260
5 212
6 170
7 139
8 113
9 90
Childproof lock
Your hob is fitted with a childproof lock, which you
can use to lock the hob when you are not using it:
When the hob is switched off (for cleaning the
n
appliance) or to prevent unintended switching
on (by children);
Switching on
Turn both (middlemost) knobs to the left (while the
other knobs remain in the zero position).
An "L" appears in the display to show that the
childproof lock has been enabled.
Switching off
The childproof lock can be disabled in the same
way. A "0" appears in the display after the
childproof lock has been disabled.

Extra safety

Safety hob
A sensor continuously measures the
n
temperature of certain parts of the hob. In case
of temperatures rising too high, the power is
reduced automatically.
As soon as you remove the pan from the
n
hob, the cooking zone automatically stops.
Accustom yourself to stop the cooking zone or
hob manually to avoid unintended switching on
of the induction hob.
The cooking zone turns off when no pan is
n
detected during a period of 10 minutes.
Safety pans
Every cooking zone is equipped with a sensor that
measures the temperature of the bottom of the
pan to avoid any risk of overheating when a pan
boils dry.
Safety metal parts
A small object like a pan that is too small
(diameter of bottom smaller than 12 cm), a fork or
a knife will not be recognised by the appliance.
The display continues to flash and the hob will not
switch on.