Controlling The Light Effects Using The Remote Control - LIVARNO LUX HG00146 Instructions D'utilisation Et Consignes De Sécurité

before using the remote control
for the first time.
Be sure there are no obstacles
between the transmitter and
receiver.
Press the
remote control to switch the
LED strip
2
Please remember the power
supply will continue to draw
a small amount of electricity
even without the light being
operated so long as the
power supply
into the socket. To switch the
product off completely, unplug
the power supply
socket.
Controlling the
light effects using
the remote control
Note: Please refer to the included
instructions for use for the remote
control for a detailed description
of the remote control
The remote control has 24 buttons.
These buttons can be divided into
the following groups:
14 GB/IE/NI
button on the
on or off.
is plugged
3
from the
3
functions.
7
Static colour selection
buttons
These buttons control the
CS
colour mode of the entire
LED strip. Combined with
C3
the light program buttons
C7
you can define the colour
C16
selection of most light pro-
grams.
w/cw
Light program buttons
Auto
Flash
Jump
Meteor
the colour range of these light
programs. This does not apply to
the "Auto" program.
Parameter buttons
IC Set
mode. Whilst the colour program
The LED strip
features
14 different
light programs.
Preselecting the
colour using the
colour selection
buttons will set
Use the arrow
buttons to adjust
the brightness of
the LED strip in
static colour