Preparing The Product For Use; Switching The Lamp On / Off; Controlling The Light Effects With The Remote Control - LIVARNO LUX 102618-14-01 Instructions De Montage, D'utilisation Et Consignes De Sécurité

Preparing the product for use

Switching the lamp on / off

Press the ON button of the remote control
the light on.
Press the OFF button of the remote control to switch the
light off.
Note: The OFF switch of the remote control is only suita-
ble for short term switching off of the light.
Pull the plug in mains adapter
to switch off the light permanently.
Controlling the light effects with the
remote control
Note: The infrared sensor is on the opposite side to the
battery compartment. The receiver is on the LED driver
The range is approx. 6–8 m
Note: For all light functions except STROBE and FADE the
intensity can be adjusted.
Ensure that there are no obstacles between the sender
and the receiver.
, to switch
6
from the mains socket
2
.
1
GB/IE 11